Silverline UK Ltd, Manufacturers of Water Treatment Equipment

Maintenance

INSTRUCTIONS TO ADJUST THE SOFTNESS/HARDNESS OF YOUR WATER

There are three valves on the water line connected to your softener

  • The inlet and outlet valves are attached to the inlet and outlet hoses
  • The bypass valve is situated between the inlet and outlet valves
  • The bypass valve is normally in the shut position while the inlet and outlet valves are open

FOR SOFT WATER

The bypass valve is shut and the inlet and outlet valves open

FOR HARD WATER

The bypass valve is open and the inlet and outlet valves shut

TO ADJUST THE SOFTNESS – VERY SLIGHTLY

Open the bypass valve to allow a small amount of hard water to blend with the softened water if your water is too soft. Adjust the amount the valve is open until you have water of the desired softness